Raymarine HSB Chartplotter User Manual - Placing A Waypoint

Chapter 3: Waypoints, Routes and Tracks

45

➤

To access waypoint soft keys, press MARKS:

D4169-1

PLACE WPT

AT CURSOR

PLACE WPT

AT VESSEL

WAYPOINT

LIST

Placing a Waypoint

The 

Place and Goto a Waypoint Scenario in Chapter 2 

 provides a

simple example of how to place a waypoint.

➤

To place a waypoint at the cursor position or at the vessel position:

1. Move the cursor to the required location, press MARKS.

2. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT

VESSEL soft key.

The waypoint is added to the waypoint list and named using the next

available number.

The waypoint soft keys are displayed until you move the cursor away

from the waypoint. You can use the EDIT WAYPOINT soft key to

name the the waypoint as described in Editing Waypoints below.

➤

To place a waypoint using the Waypoint List:

1. Press MARKS, followed by the WAYPOINT LIST soft key. The

Waypoint List and associated soft keys are displayed.

GOTO

WAYPOINT

EDIT

WAYPOINT

MAKE NEW

WAYPOINT

WAYPOINT

TRANSFER

D4262-1

WAYPOINT LIST

SYMBOL         NAME

WAYPOINT 001

WAYPOINT 002

WAYPOINT 003

WAYPOINT 004

WAYPOINT 005

  50°21^966N

 001°20^368W

POSITION

BRG _186°

BRG _21.0nm

TEMP

  ---°

C

DEPTH 

---

m

DATE  --/--/--

TIME  --:--:--

PLACE WPT

AT CURSOR

WAYPOINT

LIST

PLACE WPT

AT VESSEL

Placing a

Waypoint