Raymarine HSB Chartplotter User Manual - Selecting A Waypoint

46

HSB Series Chartplotter

2. Press the MAKE NEW WAYPOINT softkey.

The waypoint is placed at the current vessel position, or if not

available, the cursor position. It is added to the Waypoint List and

named with the next available number.

To return to the default softkey display, press ENTER twice.

Selecting a Waypoint

Positioning the cursor over a waypoint selects that waypoint and

accesses the waypoint soft keys. These keys enable you to go to

(described in Section 3.4), edit (symbol, name, position), erase or move

the waypoint.

Selecting a waypoint from the List allows you to go to and edit (symbol,

name, position, erase) the waypoint. The Waypoint List also provides

options to make a new waypoint and transfer waypoints.

➤

To select a waypoint using the cursor:

1. Move the cursor over the waypoint, until the letters WPT are

displayed.

The Waypoint Data box (see Waypoint Data Display below) and the

following soft keys are displayed:

D4163-1

GOTO

WAYPOINT

EDIT

WAYPOINT

ERASE

WAYPOINT

MOVE

WAYPOINT

The selected waypoint can be edited via these soft keys.

➤

To select a waypoint using the Waypoint List:

1. Press MARKS, followed by the WAYPOINT LIST soft key.

The Waypoint List and associated soft keys are displayed.

The list details all waypoints in alpha-numeric order. The selected

waypoint is indicated by the grey selection bar; its position, bearing

and range are provided.

3. Use the trackpad to move the selection bar up and down the list to

highlight the required waypoint.

The selected waypoint can be edited via the soft keys displayed.

MAKE NEW

WAYPOINT

WAYPOINT

LIST

Selecting a

Waypoint