Raymarine HSB Chartplotter User Manual - Display Unit Features

4

HSB Series Chartplotter

Display Unit Features

• Uses position information from GPS, dGPS or Loran-C technology

• Displays chart information from the C-MAP NT

®

 chart cards (C-Cards)

• Displays and transfers Seatalk, NMEA and HSB data

• Provides full control of data from other HSB instruments

• Three full-screen operating modes: Radar, Chart, Data Log (if

appropriate data is available)

• View radar and chart simultaneously and synchronise radar image

with chart screen

• Half-screen windows to display additional data: Course Deviation

Indicator (CDI), Bearing Deviation Indicator (BDI), navigation data

• Cursor echo across SeaTalk, and between chart and radar windows

Display Unit Functions

The HSB Series Chartplotter includes the following functions:

• Place, Move, Erase and Edit a Waypoint

• Goto Waypoint or Cursor

• Create, Save, Name, Edit and Follow a Route

• Review Route and Waypoint Lists

• Display vessel’s track on-screen; Save and Name the Track for re-call

to screen

• Measure Chart Distances and Bearings on-screen

• Set Up Alarms and Timers

• Man OverBoard (MOB) to navigate back to a missing person or object

• Differential GPS tuning page

Operating Modes

If you have a combined Radar/Chartplotter Unit, or have an HSB Radar

connected three full-screen modes as shown opposite are available

(chart, radar and data log); data log mode is used to initiate and display a

running log of vessel travel. You select the mode using the DISPLAY

key as described in Chapter two.

Display Unit

Features &

Functions