Raymarine HSB Chartplotter User Manual - 4.7 Data Log Mode

Chapter 4: Further Chart Operations

79

4.7 Data Log Mode

You can set the chartplotter to log course data every thirty minutes. Up to

48 log entries are held, when 48 entries have been made, the

chartplotter will start overwriting the first entries.

You start the log using soft keys provided in Data Log Mode. When you

select Data Log Mode the log is displayed full-screen. If the screen is full,

you use the trackpad to scroll the list and view further log entries. Each

line in the log shows:

• Time of log entry

• Position at time of log entry

• Course Made Good (CMG) since last log entry

• Distance Made Good (DMG) since last log entry

Once you have enabled the data log, you can use the DISPLAY key to

change full-screen mode; data continues to be logged, but you must

change to Display Log Mode to view it.

You can stop the log at any time and you can clear the log from memory.

➤

To activate Data Log Mode:

1. Press DISPLAY, the DISPLAY pop-up is shown.

2. Press DISPLAY again, until LOG is selelcted, then press ENTER.

➤

To start recording log entries:

Press the START LOG soft key. As shown in the following

illustration, the chart plotter records the time and vessels position.

Every thirty minutes the time, new position, distance made good and

course made good are recorded.

The START LOG soft key changes to STOP LOG.

START LOG

Data Log Mode