Raymarine HSB Chartplotter User Manual - Setting Up A Track

68

HSB Series Chartplotter

Setting Up a Track

You use the track soft keys to switch the track on and to specify the

interval at which track points are saved. The interval default is a distance

of 0.1nm. The maximum track length is 1000 points, when the track has

reached this length, the first points are overwritten. The track is saved

until you switch it off.

➤

To set up a track:

1. Press the TRACK INTERVAL soft key.

Press the appropriate soft key to set either a time interval or a

distance interval; press the UP arrow to increase the interval, the

DOWN arrow to decrease the interval.

Press ENTER to return to the track soft keys.

TIME

1S

D4258-1

DISTANCE

0.1nm

2. Press the TRACK OFF ON soft key to toggle tracks on.

Your vessels trail will be displayed on-screen, with a line joining the

points at the selected interval.

Clearing the Current Track

You can clear the current track from the screen. When you select

CLEAR, if the current track has not been saved, you have the option of

saving it.

➤

To clear the current track:

1. Press the CLEAR TRACK soft key.

2. If the track has not been saved the SAVE TRACK soft keys are

displayed.

To clear the track without saving it in the Track List, press NO.

To save the track in the list, press YES. The Name track soft keys

are displayed and you should continue as described in the following

section, Saving and Naming a Track.

The current track is cleared from the screen and the default soft keys are

displayed.

TRACK

INTERVAL

TRACKS

OFF ON

Setting Up a

Track & Clearing

the Current Track

CLEAR

TRACK