Raymarine HSB Chartplotter User Manual - page 59
Use the softkeys to edit the current route.
Press UNDO WAYPOINT to remove the last waypoint in a route and
PLACE waypoint to add a waypoint at the end of the route.
Press ACCEPT ROUTE to finish.
Use the soft keys to set up a series of waypoints as a route.
Use the trackpad to move the cursor then press PLACE WAYPOINT,
continue until the route is complete.
Press ACCEPT ROUTE to finish.
Use the soft keys to manage the route database list.
Use the trackpad to select a route then press the required softkey.
ROUTE
LIST
MAKE
ROUTE
PLACE
WAYPOINT
UNDO
WAYPOINT
ACCEPT
ROUTE
Use to save and name the current route.
MORE!
Press to reverse the waypoint order in the current route.
REVERSE
ROUTE
YES
NO
NAME ROUTE
SAVE
ROUTE
SHOW
ROUTE
ERASE
ROUTE
ROUTE
INFO
NAME
ROUTE
ROUTE
D4176-1
PLACE
WAYPOINT
UNDO
WAYPOINT
ACCEPT
ROUTE
CLEAR
ROUTE
Press to clear the current route from the display, if it is not saved you
are prompted to save the route.
EDIT
ROUTE
Press to navigate to the cursor position.
When you press GOTO CURSOR, a temporary waypoint is added at the
cursor position and the GOTO is started. Press STOP GOTO to cancel.
STOP
GOTO
GOTO
CURSOR
Use to navigate to a waypoint selected from the waypoint database list.
Use the trackpad to select the waypoint then press the soft key to start
the GOTO.
GOTO
WAYPOINT
GOTO
WAYPOINT
FOLLOW
ROUTE
GOTO
CURSOR
STOP
FOLLOW
RESTART
XTE
WAYPOINT
ADVANCE
Press to follow the current route.
Use the softkeys to cancel the follow, or to modify the route whilst it is
being followed
GOTO
D4159-1