Raymarine HSB Chartplotter User Manual - page 21

6

HSB Series Chartplotter

In addition, in chart or radar full-screen mode you can set 

Windows On

to split the display into two half-screen windows for supplementary data

display as described below. The upper window shows the selected

mode (chart or radar); operating control defaults to the upper window,

but you can switch control between the radar and chart window with a

single key-press.

The following information, if available on your system, can be shown:

Full-Screen Mode

Half-Screen Window Options

Chart

CDI, BDI, Nav Data or Radar

Radar

CDI, BDI, Nav Data or Chart

Data Log

Not available

Half-screen Window Options

You can choose one of the following for display in the lower window:

• CDI: This gives the Course Deviation Indicator. It is a graphical display

showing the deviation from the required track with reference to the

target waypoint. The display also provides the cross track error (XTE)

distance, and the range, bearing and time to go (TTG) to the target

waypoint.

• BDI: This gives the Bearing Deviation Indicator. It is a graphical

display showing the deviation from the required bearing with

reference to the target waypoint. The display also provides the cross

track error (XTE) distance, and the range, bearing and time to go

(TTG) to the target waypoint.

• Nav Data: This shows nine data boxes, providing navigational data in

the units specified in your set up. Note that up to six of these boxes are

also available as a user-selectable group (see Section 5.3 System

Parameters).

• Radar display: If radar data is available, either as a function of the

combined display unit or via the HSB link, it can be displayed. Refer to

the 

Pathfinder HSB Series Radar Handbook

 for detailed information.

Details on selecting windows are given in Chapter 2.

Operating

Modes