Raymarine HSB Chartplotter User Manual - Waypoint Data Display

Chapter 3: Waypoints, Routes and Tracks

47

Waypoint Data Display

Waypoint data can be viewed in two ways: you can use the context-

sensitive cursor to select the waypoint and thus display the waypoint

data box, or you can view waypoint details on the waypoint list.

Note: To permanently display the target waypoint data box, select it in

the System Set Up menu (see Chapter 5) and use the SCREEN soft key

to switch data boxes on.

➤

To display the waypoint data box:

Move the cursor over the waypoint. The waypoint data box is displayed,

this indicates waypoint number/name, bearing and range.

Whilst the cursor is over the waypoint, the waypoint soft keys are

displayed.

➤

To remove the waypoint data box either:

Move the cursor away from the waypoint, or

Press CLEAR; the waypoint soft keys are displayed until you move the

cursor.

➤

To display the waypoint details from the waypoint list:

Select the waypoint in the list as described above.

The details for the selected waypoint are displayed in the lower half of

the window. Temperature, depth, date and time are included (if

available) for waypoints placed at the vessel position.

To remove the Waypoint List and return to the default soft key display,

press ENTER twice .

Editing the Waypoint Details

You can change the name, symbol and position of any waypoint.

➤

To edit a waypoint:

1. Select the waypoint, using the cursor or the waypoint list, as

previously described. The waypoint soft keys are displayed.

2. Press the EDIT WAYPOINT soft key. The Edit Waypoint soft keys

are displayed:

D4166-1

SYMBOL

NAME

POSITION

WAYPOINT

LIST

Waypoint Data

Display & Editing

 Waypoint Details

WAYPOINT

LIST

EDIT

WAYPOINT