Raymarine HSB Chartplotter User Manual - page 87
70
HSB Series Chartplotter
Naming, Erasing and Showing a Track
➤
To name an existing track, erase a track or show a track, you select the
track from the track list, then press the appropriate soft key as follows:
1. Press the TRACK LIST soft key. The Track List is displayed. The
grey selection bar indicates the selected track.
Select the required track then press the appropriate soft key.
2. If you NAME a track, use the trackpad to move the cursor right or left
to the character you wish to edit. Then use the top or bottom of the
trackpad to edit the letter or number. Press ENTER finish the
operation.
3. If you ERASE a track you are prompted to confirm.
Press NO to cancel the operation, then ENTER if you wish to
remove the track list.
Press YES to erase the track from the list, then ENTER to remove
the track list.
4. If you SHOW a track, and you have a current track on screen, you
are prompted to save the track. Proceed as previously described in
Clearing the Current Track.
Alternatively, press the NO soft key to cancel the SHOW TRACK
operation.
The track list is removed and the selected track is displayed.
Managing
Tracks
TRACK
LIST
NAME
TRACK
ERASE
TRACK
SHOW
TRACK