Raymarine HSB Chartplotter User Manual - page 37
22
HSB Series Chartplotter
Selecting a Half-screen Window for Display
➤
To select a window:
1. From the full-screen Chart (or Radar) mode, press the DISPLAY
key.
The following soft keys are displayed with an image of each available
window:
DISPLAY
D4156-2
SELECT
WINDOW
WINDOWS
OFF ON
2. To select a window, press either SELECT WINDOWS soft key until
the required window is highlighted (if necessary, this will toggle
windows on), then press ENTER.
3. To toggle windows off, press the WINDOWS OFF ON soft key.
If any data boxes were displayed at the bottom of the full-screen image,
they are moved to the upper window when you turn windows on.
Switching Control Between Radar & Chart Screens
In a combined or integrated system, to switch control between radar and
chart, you can change the full-screen mode. Alternatively, when you
have both radar and chart displayed in half-screen windows the soft key
RDR CHRT lets you toggle operating control between the radar and the
chart window.
If a window is active and you switch windows off, control automatically
returns to the full-screen mode.
GOTO
MORE!
ROUTE
D4168-1
RDR CHRT
➤
To change the active window, press the RDR/CHRT soft key to toggle
control between the radar and chart display.The current active display is
highlighted in grey on the RDR/CHRT label and the cursor appears in
that window.
Selecting the
Mode of
Operation
WINDOWS
OFF ON
RDR CHRT