Raymarine HSB Chartplotter User Manual - Editing A Route

58

HSB Series Chartplotter

3. If you NAME a route, use the trackpad to move the cursor right or left

to the character you wish to edit. Then use the top or bottom of the

trackpad to increase or decrease the letter or number.

4. Press ENTER to clear the Name List, then to return to the default soft

key display, press ENTER again.

Editing a Route

Once you have created a route, you can edit it by:

• Inserting a Waypoint into the route

• Adding waypoints at the end of the route

• Removing a Waypoint

• Reversing a Route

• Moving a Waypoint as described in Section 3.2

Any changes you make to the route affect only the current route. The

current route is always held in position 0 in the database, so you need to

Save the route if you want to keep the changes.

Inserting a Waypoint into a Route

You can use the context-sensitive cursor to insert one or more

waypoints in the current route. However, if the route is being followed

you cannot insert a waypoint into the current leg.

➤

To insert a new waypoint in the current route:

1. Move the cursor over the route leg into which you wish to insert a

waypoint, until the letters RTE and the route leg data box are

displayed. The Route soft keys are displayed.

2. Press ENTER. The cursor changes to a four-way arrow, controlling a

new waypoint. The waypoint is connected to the existing waypoints

on either side with a dashed line.

3. Move the new waypoint to the required position, and press ENTER

to drop it and return to normal cursor operation, or CLEAR to

abandon the operation.

The new waypoint is temporarily added to the waypoint list and named

with the first available waypoint number. The waypoints in the current

route are re-numbered to identify the new positions.

Note: if you Clear the route before it is Saved, the new waypoint is

removed.

Editing a Route

NAME

ROUTE