Canon 7086 Series Service Manual - page 211
Chapter 5
5-25
the standard white plate)
5.4.4 Scanning Lamp
5.4.4.1 Before Starting the Work
0011-8535
iR7105 / iR7095
1) Remove the copyboard glass.
2) Remove the hopper upper cover.
3) Remove the primary charging assembly cover.
4) Remove the process unit cover.
5) Remove the upper inside cover.
6) Remove the upper front cover unit [1].
- 3 screws [2]
F-5-63
7) Remove the lower left cover.
8) Remove the upper left cover.
9) Remove the reader front cover [1].
- 2 screws [2]
- 2 magnets [3]
F-5-64
10) Remove the reader left cover [1].
- 4 screws [2]
F-5-65
11) Remove the reader rear cover [1].
- 2 connectors [2]
- 5 screws [3]
F-5-66
12) Remove the reader upper rear cover [1].
- 1 screw [2]
F-5-67
13) Remove the scanning lamp inside cover [1].
- 2 screws [2]
F-5-68
5.4.4.2 Before Starting the Work
0011-8098
iR7086
1) Remove the copyboard glass.
2) Remove the hopper upper cover.
3) Remove the reader right cover [1].
F-5-69
4) Remove the reader right plate [1].
- 4 screws [2]
[2]
[1]
[1]
[2]
[3]
[3]
[1]
[2]
[2]
[1]
[2]
[3]
[1]
[2]
[1]
[2]
[1]