Canon 7086 Series Service Manual - page 42
Chapter 1
1-12
Standard Local Print Settings
Paper Select: Auto*1, All Paper Sources
Copies: 1*1 to 9,999 sets
Finishing:
If the Optional Finisher-V1 or Saddle Finisher-V2 Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Staple (Corner: Top Left, Bottom Left, Top Right, Bottom
Right) (Double: Left, Right)
If the Optional Punch Unit-V1 Is Attached to the Optional Finisher-V1 or Saddle Finisher-V2:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top Left, Bottom Left, Top
Right, Bottom Right), (Double: Left, Right), Hole Punch
If the Optional Paper Folding Unit-D1 Is Attached to the Optional Finisher-V1 or Saddle Finisher-V2:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top Left, Bottom Left, Top
Right, Bottom Right), (Double: Left, Right), Z-Fold
If the Optional Punch Unit-V1 and Paper Folding Unit-D1 Are Attached to the Optional Finisher-V1 or Saddle
Finisher-V2:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top Left, Bottom Left, Top
Right, Bottom Right), (Double: Left, Right), Hole Punch, Z-Fold
If the Optional High Capacity Stacker-A1 Is Attached
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group
If the Optional High Capacity Stacker-A1 and Finisher-V1 or Saddle Finisher-V2 Are Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top Left, Bottom Left, Top
Right, Bottom Right) (Double: Left, Right)
If the Optional High Capacity Stacker-A1 and Punch Unit-V1 Are Attached to the Optional Finisher-V1 or
Saddle Finisher-V2:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top Left, Bottom Left, Top
Right, Bottom Right) (Double: Left, Right), Hole Punch
If the Optional High Capacity Stacker-A1 and Paper Folding Unit-D1 Are Attached to the Optional Finisher-
V1 or Saddle Finisher-V2:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top Left, Bottom Left, Top
Right, Bottom Right) (Double: Left, Right), Z-Fold
If the Optional High Capacity Stacker-A1, Punch Unit-V1 and Paper Folding Unit-D1 Are Attached to the
Optional Finisher-V1 or Saddle Finisher-V2:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top Left, Bottom Left, Top
Right, Bottom Right) (Double: Left, Right), Hole Punch, Z-Fold
Offset: 1*1 to 9,999 sets
Face Up/Face Down: Auto*1, Face Down (Normal), Face Up (Reverse)
Stack. Destination*2
Stacker*1, Output Tray
Two-sided Print: On (Book Type, Calender Type), Off*1
Merge Documents: On, Off*1
Language Switch
ON/OFF*1
Reversed Display (Color)
ON/OFF*1
Offset Jobs*2
ON*1/OFF
Job Separator between Jobs
ON/OFF*1
Job Separator between Copies
ON/OFF*1
Number of Copies/Wait Time Status Display
ON*1/OFF
Register Sizes for Side Paper Deck*2
A3/A4/A4R/B4/B5/11"X17"/LGL/LTR/LTRR
Different Paper Sizes for the Output Tray*2
ON*1/OFF
Cleaning Display for the Original Scanning Area
ON*1/OFF
Limited Functions Mode*2
Finisher Tray A/B: ON/OFF*1
Finisher Saddle Stitcher Unit: ON/OFF*1
Finisher Inserter: ON/OFF*1
Folding Unit: ON/OFF*1
Puncher Unit: ON/OFF*1
Stacker: ON/OFF*1
Item
Settings