Canon 7086 Series Service Manual - page 364
Chapter 9
9-8
F-9-11
SERVICE MODE:
COPIER > OPTION > BODY > OHP-TEMP (transparency mode temperature setting switchover)
0: 198 dg C (default)
1: 193 dg C
2: 188 dg C
3: 183 dg C
9.3.1.3 Heavy Paper Mode
0010-8236
iR7105 / iR7095 / iR7086
To prevent a drop in the surface temperature of the fixing roller in heavy paper mode, the machine uses a higher down sequence shift temperature.
The machine uses heavy paper down sequence mode when 'heavy paper' is selected for the following in user mode: common settings>paper type.
SERVICE MODE:
COPIER > OPTION > BODY > FIX-TEMP (heavy paper down sequence start temperature setting)
COPIER > OPTION > BODY > TEMP-TBL (heavy paper mode copy temperature setting; Jpn model only)
To prevent down sequence from starting with the 1st sheet in heavy paper mode, the machine uses heavy paper temperature control (in view of the fact that the
Japanese model uses a control temperature of 188 deg C for printing).
9.3.1.4 Power Save Mode
0010-8237
iR7105 / iR7095 / iR7086
A press on the Power Save key of the control panel causes the machine to decrease the STBY control temperature to reduce power consumption.
Setting
iR7105
86 cpm
74 cpm
Suspend
Resume
iR7095
77.8 cpm
67 cpm
Suspend
Resume
iR7086
70 cpm
60 cpm
Suspend
Resume
0 (default)
194 deg C
193 deg C
183 deg C
198 deg C
1
189 deg C
188 deg C
178 deg C
193 deg C
2
184 deg C
183 deg C
173 deg C
188 deg C
Setting
Heavy paper copy temperature
0
+10 deg C
1 to 4
+0 deg C
Wait indication
Green
Green
Red
Fixing motor (M3)
Main heater (H1)
Sub heater (H2)
STBY
INTR
LSTR
STBY
Transparency
mode selected
Start key ON
205
200
198
193
Transparency control temperature
Controlled to
198 deg C
Controlled to
198 deg C
Continues idle rotation until
the surface temperature of
the fixing roller drops to the
transparency control temperature.
195
Controlled to
195 deg C
*If the reading of the thermistor is lower that
the transparency control temperature, printing is started as is.
for Jpn model, -10 deg C for all.