Canon 7086 Series Service Manual - page 89
Chapter 2
2-31
F-2-123
iR7105/7095 Only
1) Fit the cleaning instructions label [1] of the appropriate language on the
upper rear cover as indicated, and attach it over the existing label. (The
English label is attached at time of shipment.)
F-2-124
1) Fit the Lamp Warning Label [1] of the appropriate language on the upper
rear cover as indicated, and attach it over the existing label. (The English
label is attached at time of shipment.)
F-2-125
1) Open the manual feeder assembly [1] of the ADF; then, fit the Manual
Feeder Set Label [2] as indicated, and attach it in place.
F-2-126
2.2.18 Others
0012-2444
iR7095P
1) Affix the shut down instruction label [1] in the appropriate language on
the indicated position.
F-2-127
2.2.19 Attaching the Labels, Placing Paper, and Checking
Images and Operation
0010-8971
iR7105 / iR7095 / iR7086
1) Check with the user to find out the size of paper that will be used.
2) Press the release button of the front deck (right, left), and slide out the
deck.
3) Attach the 3-hole paper placement label [1].
F-2-128
4) Put paper in the front deck (right/left).
5) Close the front deck (right/left). Affix the corresponding cassette size la-
bel [1] onto the paper size plate of the each deck.
A4
A3
B5
B4
A5
A4R
B5R
A5R
[1]
[1]
[1]
If you are changing the size of the front deck (right, left), refer to the
instructions under "Switching Over the Front Deck (right/left) Paper Size."
[2]
[1]
ON
[1]
[1]