Canon 7086 Series Service Manual - page 715
Chapter 18
18-24
An old model has to be upgraded to the V50.00 system or later for an upgraded device.
See the following procedure to upgrade.
1) Before upgrade, backup the data if needed.
2) Register the Boot V10.99 and each firmware for upgrade device in SST (Ver.3.34 or later) beforehand.
3) Start with pressing 2 + 8 and rewrite the Boot ROM with using SST. (For upgrade device Boot V10.99)
After rewriting, becomes V4.44.
4) After turning OFF the power, start with pressing 2 + 8.
At upgrade, HDD must be all formatted; thus, user data saved in HDD will be initialized.
The data in additional function cannot be imported with the upgraded device; thus, backup is not needed.
Main data items which cannot be taken over after upgrade
Service action at upgrade
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Tell user that it will be deleted
Ask user to reset
Ask user to reset
Tell user that it will be deleted
Ask user to reset
Tell user that it will be deleted
Tell user that it will be deleted
Tell user that it will be deleted
Tell user that it will be deleted
Tell user that it will be deleted
Ask user to reset
Ask user to reset
Tell user that it will be deleted
Document data items in the box
Service action at upgrade
User Inbox
Ask user to backup with BOX backup function. If an
environment privents users from backing up, ask them to output.
Conf.Fax Inbox, Memory Rx Inbox, Form for Form Compositon
Before upgrade, it cannot be backed up and it will be deleted. So
ask users to output.
Address Book related data items
Service action at upgrade
Favorites Button
Import after export
Address Book (Including the one-touch button)
Import after export
Fowarding Settings
Import after export
MEAP related data items
Service action at upgrade
If application supports J2ME1.1
Prepare the supporting .jar file
If the application which does not support J2ME1.1 is included.
System cannot be upgraded
If the application uses the limited license
Save the invalid license at uninstallation and reinstall by using it
If the application uses the unlimited license (reusable license).
Can be reinstalled with the same license
Note that once Boot ROM is rewritten, it cannot be returned to the old model.
If it does not start, E0602-0002 error will occur.