Canon 7086 Series Service Manual - page 220
Chapter 5
5-34
5.4.11.2 Removing the Scanner Home Position Sensor
0011-8645
iR7105 / iR7095
1) Remove the reader rear cover (small) [1].
- 1 screw [2]
2) Remove the plate [3].
- 3 screws [4]
F-5-121
3) Remove the sensor mounting plate [1].
- 1 screw [2]
F-5-122
4) Remove the scanner home position sensor [1].
- 1 connector [2]
F-5-123
5.4.11.3 Before Starting the Work
0011-8117
iR7086
1) Disconnect the 3 connectors [1].
F-5-124
2) Remove the upper rear cover [1].
- 3 screws [2]
F-5-125
3) Remove the reader rear cover [1].
- 5 screws [2]
F-5-126
F-5-127
5.4.11.4 Removing the Scanner Home Position Sensor
0011-7981
iR7086
1) Remove the 4 screws [1], and detach the plate [2].
F-5-128
2) Remove the screw [1], and detach the sensor base [2].
[1]
[2]
[3]
[4]
[1]
[2]
[3]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[1]
[2]