Canon 7086 Series Service Manual - page 408
Chapter 10
10-24
- 1 screw [3] (w/ washer)
F-10-89
10.5.24 All Night Power Supply PCB
10.5.24.1 Before Starting the Work
0011-7620
iR7105 / iR7095 / iR7086
1) Remove the lower left cover.
2) Remove the upper left cover.
3) Remove the cover plate.
4) Remove the delivery anti-adhesion fan mounting plate [1].
- 1 connector [2]
- 6 screws [3]
F-10-90
10.5.24.2 Removing the All Night Power Supply PCB
0010-9605
iR7105 / iR7095 / iR7086
1) Remove the all night power supply PCB [1].
- all connectors of PCB
- 4 screws [2]
F-10-91
10.5.25 Relay PCB
10.5.25.1 Removing the Relay PCB
0010-9604
iR7105 / iR7095 / iR7086
1) Remove the left lower cover. (4 screws)
2) Disconnect the connector from the PCB; then, remove the screw [1],
and detach the relay PCB [1] from the four PCB holders [2].
F-10-92
10.5.26 High-Voltage Transformer (AC)
10.5.26.1 Removing the High-Voltage Transformer
Assembly (AC)
0010-9603
iR7105 / iR7095 / iR7086
1) Remove the rear cover.
2) Remove the HV-AC PCB together with its mounting base.
- 2 connectors [2]
- 2 screws [3]
F-10-93
3) Disconnect the 3 connectors [1], and remove the screw [2]; then, detach
the high-voltage transformer assembly (AC) [3].
F-10-94
10.5.27 HV-AC PCB
10.5.27.1 Removing the HV-AC PCB
0010-9602
iR7105 / iR7095 / iR7086
1) Remove the rear cover.
2) Remove the HV-AC PCB [1].
- 2 connectors [2]
- 4 screws [3]
[1]
[2]
[3]
[2]
[2]
[3]
[3]
[1]
[1]
[2]
[2]
[1]
[2]
[2]
[2]
[2]
[1]
[2]
[3]
[3]
[1]
[1]
[2]
[3]