Canon 7086 Series Service Manual - page 414
Chapter 10
10-30
F-10-124
When mounting the fan, be sure that the direction of air current is as indicat-
ed by the arrow.
10.5.39 Power Supply Cooling Fan 1
10.5.39.1 Removing the Power Supply Cooling Fan 1
(FM11)
0010-9582
iR7105 / iR7095 / iR7086
1) Remove the left lower cover. (4 screw)
2) Remove the power supply unit.
3) Remove the 3 screws [1], and detach the fan mounting base [2].
F-10-125
4) Remove the 2 screws [1], and disconnect the connector [2]; then, detach
the power supply cooling fan [3].
F-10-126
When mounting the fan, be sure that the direction of air current is as indicat-
ed by the arrow.
10.5.40 Power Supply Cooling Fan 2
10.5.40.1 Removing the Power Supply Cooling Fan 2
(FM12)
0010-9581
iR7105 / iR7095 / iR7086
1) Remove the fan mounting base.
2) Remove the 2 screws [1], and disconnect the connector [2]; then, de-
tach the power supply cooling fan 2 [3].
F-10-127
When mounting the fan, be sure that the direction of air current is as indicat-
ed by the arrow.
10.5.41 Separation Fan
10.5.41.1 Removing the Separation Fan (FM13)
0010-9580
iR7105 / iR7095 / iR7086
1) Slide out the fixing/feeder unit.
2) Remove the 4 screws [1], and detach the fixing/feeding lower cover (1)
[2] and the fixing/feeding lower cover (2) [3].
F-10-128
3) Disconnect the connector [1], and remove the heater 3 screws [2]; then,
detach the separation fan [3].
F-10-129
[1]
[3]
[2]
[2]
[1]
[1]
[1]
[3]
[1]
[2]
[1]
[3]
[2]
[1]
[1]
[1]
[3]
[2]
[1]
[3]
[1]
[2]
[2]