Canon 7086 Series Service Manual - page 638
Chapter 17
17-50
T-17-41
Code
Name
Code
Name
Code
Name
1
manual feeder tray pickup clutch (CL7)
8
deck (left) pickup clutch (CL11)
15
registration brake clutch (CL3)
2
cassette 3 pickup clutch (CL12)
9
vertical path 2 clutch (CL9)
16
manual feeder tray transport clutch (CL18)
3
vertical path 3 clutch (CL13)
10
pre-registration clutch (CL5)
17
buffer inside magnet roller drive clutch
(CL1)
4
cassette 4 pickup clutch (CL14)
11
lower transport middle clutch (CL16)
18
developing cylinder clutch (CL4)
5
vertical path 4 clutch (CL15)
12
lower transport right clutch (CL17)
19
registration roller clutch (CL2)
6
deck (right) pickup clutch (CL10)
13
deck (left) transport clutch (CL19)
20
side paper deck transport clutch (CL101)
7
vertical path 1 clutch (CL8)
14
delivery speed switchover clutch (CL21)
21
side paper deck pickup clutch (CL102)
Code
Name
Code
Name
1
drum motor (M0)
8
horizontal registration motor (M15)
2
main motor (M1)
9
duplexing reversal motor (M11)
3
pickup motor (M2)
10
duplexing transport motor (M12)
4
fixing motor (M3)
11
deck main motor (M101)
5
laser scanner motor (M4)
12
vibration motor1 (M10)
6
sub hopper inside toner feed motor (M22)
13
vibration motor2 (M20)
7
buffer motor (M18)
Code
Name
Code
Name
1
deck (right) pickup solenoid (SL7)
7
delivery flapper solenoid (SL3)
2
deck (left) pickup solenoid (SL8)
8
reversal flapper solenoid (SL11)
3
deck 3 pickup solenoid (SL9)
9
fixing web solenoid (SL2)
4
cassette 4 pickup solenoid (SL10)
10
fixing feed unit lock solenoid (SL4) lock
5
manual feed pickup clutch solenoid (SL6)
(The manual feeder pickup roller moves up.)
11
fixing transport unit lock solenoid (SL4) unlock
12
not used
6
manual feeder pickup clutch solenoid (SL6)
(The manual feeder pickup roller moves down.)
13
side paper deck pickup solenoid
14
not used
COPIER > FUNCTION > CLEAR
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item
Description
Level
ERR
Use it to reset an error code.
1
E000, E001, E002, E003, E005, E013, E019, E020, E717, E719
1) Select the item, and press the OK key.
2) Turn off and then on the main power.(Cleared after turning OFF/ON the main power.)
DC-CON
Use it to initialize the RAM on the DC controller PCB.
1
1) Print out the particulars of service mode by making the following selections: COPIER > FUNCTION > MISC-P > P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.(Cleared after turning OFF/ON the main power.)
4) As necessary, enter the data printed out using P-PRINT.
R-CON
Use it to initialize the RAM on the reader controller PCB.
1
1) Print out the particulars of service mode by making the following selections: COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power. (Cleared after turning OFF/ON the main power.)
4) As necessary, enter the data printed using P-PRINT.
JAM-HIST
Use it to reset the jam history.
1
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
ERR-HIST
Use it to reset the error code history.
1
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
PWD-CLR
Use it to reset the password for 'system administrator' set in user mode.
1
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
ADRS-BK
Use it to reset the address book data.
1
1) Select the item, and press the OK key.
2) Turn off and then back on the main power switch.(Cleared after turning OFF/ON the main power.)