Canon 7086 Series Service Manual - page 87
Chapter 2
2-29
F-2-114
20) Connect the connector [1] of the control panel interface to the control
panel unit.
21) Fit the ferrite core [2] to the control panel interface. (230 V only)
F-2-115
22) Hook the claw [1] of the upper rear right cover on the hole in the cover
support plate, and attach the upper rear right cover [2].
- 3 screws [3], removed in step 1)
- 1 screw (binding; M4X10) [4], included
F-2-116
2.2.12 Supplying Toner
0010-8961
iR7105 / iR7095 / iR7086 / iR7095P
1) Open the hopper cover [1].
F-2-117
2) Peel off the packing tape from the machine.
3) Shift the toner cartridge locking lever [1] to the left to release.
F-2-118
4) Hold the toner bottle [1] as shown, and turn the cap [2] in the direction of
the arrow to detach the cap from the bottle.
5) Fit the toner bottle [1] in place.
6) Shift the toner cartridge locking lever [1] to the right to lock it in place.
F-2-119
7) Close the hopper cover.
2.2.13 Turning On the Main Power
0011-6943
iR7105 / iR7095 / iR7086 / iR7095P
[2]
[1]
[1]
[2]
[2]
[4]
[1]
[3]
[3]
[1]
Do not shake the toner bottle.
Be sure to push it until it stops.
[1]
[1]
[2]
[1]
[1]