Oceanic ATOM Operating Manual - page 11

11

OPERATING MODE STRUCTURE

Unless it is operating in Dive Computer mode, the ATOM will be

On in the default MAIN TIME (home time) mode (Fig. 1), like a

standard Watch, until the Mode is changed.

The M button is used to access 5 other Modes that include

Alternate Time Mode, Countdown Timer, Chronograph (stop

watch/lap timer), Daily Alarm, and Dive Computer Surface

Mode.  It is also used to revert to the Local Default Time display.

The screens of the Main Modes and Sub Modes will remain on

display until a button is pressed to access another screen or

Mode, activate a sequence, or for 2 minutes if no button is

pressed.  The Chronograph remains on display as long as it is

running unless another Mode is accessed.

When Wet Activation is set On, the ATOM will enter Dive Mode

upon descent below 4 feet/1.2 meters, regardless of what

operating Mode it is in.

WARNING:  When Wet Activation is set OFF, the

ATOM must be in Dive Surface Mode prior to the

first dive of a new series.  Commencing a dive

while in Watch modes will not activate Dive

Mode unless Wet Activation is set ON.

Main Sequence

 (while at home)

Main Time

Alternate Time

Countdown Timer

Chronograph

Daily Alarm

Dive Surface Mode

Alternate Sequence

(at a travel location)

Alternate Time

Main Time (home)

Countdown Timer

Chronograph

Daily Alarm

Dive Surface Mode

Fig. 1 - Main Time