Oceanic ATOM Operating Manual - page 57

57

SET ELAPSED DIVE TIME (EDT) ALARM

Information includes (Fig. 54):

>  Graphic EDT

>  Symbols DIVE and TIME.

>  Set Point value, flashing.

•  Pressing and releasing the S button momentarily (< 2 seconds)

will increase the Set Point from 0:10 to 3:00 (hours:minutes) in

5 minute (:05) increments.

•  Depressing and holding the S button will scroll through the Set

Points at a rate of 4 Set Points per second until it is released.

•  Pressing and releasing the A button momentarily (< 2 seconds)

will save the setting and/or advance to the SET TISSUE

LOADING BAR GRAPH (TLBG) ALARM screen with the Set

Point flashing.

•  Pressing and releasing the A button momentarily and repeat-

edly (< 2 seconds) will step through the other SET A screens.

•  Depressing the A and S buttons simultaneously for 2 seconds

will save the setting and revert back to the SET A screen.

•  Depressing and holding the M button for 2 seconds will revert

to the Surface Mode screen.

•  If no button is pressed during a period of 2 minutes, the unit

will revert to the Surface Mode screen.

Fig. 54 - Set EDT Alarm