Oceanic ATOM Operating Manual - page 132

132

Transmitter Battery Removal

Locate the Battery Hatch on the End of the Housing:

•  Apply a coin to the recessed slot of the Hatch (Fig. 120) and

turn it counter clockwise out of the Housing.

•  Remove the Battery from the Battery Compartment and

discard according to local regulations governing disposal of

batteries.

Inspection

•  Closely check all of the sealing surfaces for any signs of

damage that might impair proper sealing.

•  Inspect the Buttons, Lens, and Housing(s) to ensure they are

not cracked or damaged.

WARNING:  If damage or corrosion is found,

return your ATOM system to an Authorized

Oceanic Dealer, and DO NOT attempt to use it

until it has received factory prescribed service.

•  Remove the Battery Hatch O-ring(s) and inspect them for any

signs of deterioration or deformity.  DO NOT use tools to

remove the O-ring(s).

•  To ensure proper sealing, O-ring replacement is highly

recommended each time a Battery is replaced.

Fig. 120  - Transmitter Battery

Hatch