Oceanic ATOM Operating Manual - page 55

55

SET AUDIBLE ALARM information includes (Fig. 52):

>  Graphic AUD

>  Set Point graphic ON (or OFF), flashing.

•  Pressing and releasing the S button (< 2 seconds) will toggle

between ON and OFF.

•  Pressing and releasing the A button momentarily (< 2 sec-

onds) will save the setting and/or advance to the SET DEPTH

ALARM screen with the Set Point flashing.

•  Pressing and releasing the A button momentarily and repeat-

edly (< 2 seconds each time) will step through the other SET A

screens.

•  Depressing the A and S buttons simultaneously for 2 seconds

will save the setting and revert back to the SET A screen.

•  Depressing and holding the M button for 2 seconds will revert

to the Surface Mode screen.

•  If no button is pressed during a period of 2 minutes, the unit

will revert to the Surface Mode screen.

Fig. 52 - Set Audible Alarm