Oceanic ATOM Operating Manual - page 64

64

SET WET ACTIVATION ON/OFF

Information includes (Fig. 61):

>  Graphic WET

>  Set Point graphic ON (or OFF) flashing.

•  Pressing and releasing the S button will toggle between ON

and OFF.

•  Pressing and releasing the A button momentarily (< 2 sec-

onds) will save the setting and/or advance to the SET UNITS

screen with the Set Point flashing.

•  Pressing and releasing the A button momentarily and repeat-

edly (< 2 seconds each time) will step through the other SET U

screens.

•  Depressing the A and S buttons simultaneously for 2 seconds

will save the setting and revert back to the SET U screen.

•  Depressing and holding the M button for 2 seconds will revert

to the Surface Mode screen.

•  If no button is pressed during a period of 2 minutes, the unit

will revert to the Surface Mode screen.

Fig. 61 - Set Wet Activation

Refer to page 44 for

a description of the

Wet Activation

feature.