Oceanic ATOM Operating Manual - page 116
116
SWITCHING GAS MIXES
During No Decompression and/or Decompression dives, the
ATOM can be manually switched from GAS 1 to GAS 2 to GAS
3, changing Pressure related displays and calculations from
Transmitter 1 to Transmitter 2 to Transmitter 3 and/or FO2
displays and calculations from the FO2 value set for GAS 1 to the
FO2 value set for GAS 2 to the FO2 value set for GAS 3.
NOTE: Switching the ATOM from one Gas to
another cannot be performed while on the sur-
face. Every dive begins with GAS 1. 10 minutes
after surfacing from a multiple gas dive, the
ATOM's operation defaults to the GAS 1 FO2.
Access to Gas Switching screens can only be accomplished
during the time that a Main Dive Display is on the screen and
cannot be performed during the time that an Alarm is sounding.
Gas Changeover Alarm
If a Gas is being used that the ATOM is not set for (i.e., the diver
starts breathing from another Tank and doesn't switch the ATOM
to the new Gas within 60 seconds), the Audible Alarm will sound,
the red LED will flash as a warning, and the message SWCH >
GAS will scroll at the top of the display (Fig. 106) until acknowl-
edged by pressing and releasing the S button momentarily, or the
ATOM is manually Switched to the new Gas being used.
Fig. 106 - Switch Gas Alert