Oceanic ATOM Operating Manual - page 23

23

Displayed on the SET DATE screen will be the graphic YEAR,

Month and Day (or Day and Month if set for metric), and the

YEAR set point flashing.

Set Year (Fig. 13)

•  Depressing and holding the S button while the YEAR Set Point

is flashing will scroll through the Set Points in 1 year incre-

ments at a rate of 4 per second from 2004 to 2049 (with

leap year corrections).

•  Pressing and releasing the A button momentarily (< 2 sec) will

save the Year Set Point and/or advance to SET MONTH with

the Set Point flashing and the graphic MNTH.

NOTE:  The YEAR will not be displayed in any

Mode other than SET DATE.  The DATE will reset

to 1-1 2004 when the Battery is replaced.

Set Month (Fig. 14)

•  Depressing and holding the S button while the MONTH Set

Point is flashing will scroll through the Set Points in 1 month

increments at a rate of 4 per second from 1 to 12.

•  Pressing and releasing the A button momentarily (< 2 sec-

onds) will save the Month Set Point and/or advance to SET

DAY with the Set Point flashing and the graphic DAY.

Fig. 13 - Set Year

Fig. 14 - Set Month