Oceanic ATOM Operating Manual - page 65
65
SET UNITS information includes (Fig. 62):
> Graphic UNIT
> Set Point symbols/graphics F, FT, and PSI (or C, M, and
BAR), flashing.
• Pressing and releasing the S button will toggle between
Imperial (F, FT, PSI) and Metric (C, M, BAR).
• Pressing and releasing the A button momentarily (< 2 sec-
onds) will save the setting and/or advance to the SET SAFETY
STOP screen with the Time Set Point flashing.
• Pressing and releasing the A button momentarily and repeat-
edly (< 2 seconds each time) will step through the other SET U
screens.
• Depressing the A and S buttons simultaneously for 2 seconds
will save the setting and revert back to the SET U screen.
• Depressing and holding the M button for 2 seconds will revert
to the Surface Mode screen.
• If no button is pressed during a period of 2 minutes, the unit
will revert to the Surface Mode screen.
Fig. 62 - Set Units