Oceanic ATOM Operating Manual - page 68

68

SET BACKLIGHT DURATION information includes (Fig. 65):

>  Graphic GLOW

>  Symbol TIME.

>  Set Point, flashing.

•  Pressing and releasing the S button momentarily (< 2 sec-

onds each time) will step through the Set Points of 0, 5, and

10 (:XX seconds).

•  Pressing and releasing the A button momentarily (< 2 sec-

onds) will save the setting and/or advance to the SET SAM-

PLING RATE screen with the Set Point flashing.

•  Pressing and releasing the A button momentarily and repeat-

edly (< 2 seconds each time) will step through the SET U

screens.

•  Depressing the A and S buttons simultaneously for 2 seconds

will save the setting and revert back to the SET U screen.

•  Depressing and holding the M button for 2 seconds will

revert to the Surface Mode screen.

•  If no button is pressed during a period of 2 minutes, the unit

will revert to the Surface Mode screen.

Fig. 65 - Set Backlight

Duration

The Backlight will

not remain On for

the additional

Duration time set if

the L button is held

depressed longer

than10 seconds.