Oceanic ATOM Operating Manual - page 96
96
CONTROL OF DISPLAYS
During Dive Modes, there is a Main (Default) Display of important information relevant to
the specific mode that the ATOM is operating in (No Deco, Deco, Gauge, etc.).
Alternate Displays can be accessed by pressing and releasing the A button to view addi-
tional information. They will automatically revert to the Main Display after 3 seconds.
• Main > Alternate 1 (Tank Pressure) > Alternate 2 (O2 Data)
A Secondary Display can be accessed by pressing the A button for 2 seconds. It will also
automatically revert to the Main Display after 3 seconds.
• Main > Secondary (Temperature and Time of Day)
The S button is used to acknowledge and silence Alarms.
The L button is used to activate the Backlight.
• The display will be illuminated as long as the L button is depressed, plus the Backlight
Duration time that has been set (0, 5, or 10 seconds) for a maximum of 20 seconds
• The Backlight will not activate during a Low Battery condition.
The M button is used for viewing Gas Switch Preview screens (FO2) and Switching Gas.
_____________________________________________________________________________
• Upper/Left - Mode (M) button
• Upper/Right - Select (S) button
• Lower/Right - Light (L) button
• Lower/Left - Advance (A) button
ATOM
M
A >l
S >>
L
*