Oceanic ATOM Operating Manual - page 37

37

During a No Decompression Safety Stop, the set Stop Depth

(Fig. 30a) is displayed and during a Decompression condition,

the required Ceiling Stop Depth is displayed.

Time and Date Displays

Time displays are shown in hour:minute format (i.e., 1:16

represents 1 hour and 16 minutes, not 116 minutes!).  The colon

that separates hours and minutes blinks once per second when

the display is indicating real time (e.g., Surface Interval, Elapsed

Dive Time), and is solid (non-blinking) when times are calculated

projections (e.g., Time to Fly).

The Primary Time display, at the bottom of the screen, has the

largest digits of the display (Fig. 30b).  A second time display

(Fig. 30c) is located in the middle row.  Both displays are identi-

fied by the symbol TIME.

When the ATOM is operating in Dive Computer mode, Date is

displayed only to identify dive data while it is viewed in the Log

Mode (Fig. 31a).  When Units of Measure are set for Imperial,

Month appears to the left of Day.  When set for Metric units, the

Month appears to the right of Day.

Fig. 31 - Log Mode (Date)

a

a

Fig. 30 - Safety Stop

c

b