Oceanic ATOM Operating Manual - page 80

80

FLY MODE information includes (Fig. 72):

>  Alpha graphic FLY and symbol TIME.

>  Countdown Time (hours:minutes).

>  Battery icon (if a Low Battery Warning Condition exists),

flashing if Too Low

•  Pressing and releasing the A button momentarily (< 2  sec-

onds) will advance to SAT MODE.

•  Depressing and holding the M button for 2 seconds will revert

to the Surface Mode screen.

•  If no button is pressed during a 2 minute period, the unit will

revert to the Surface Mode screen.

•  Pressing the L button will activate the Backlight.

SAT MODE

The Time to Desaturate counter provides calculated time for Tissue Desatuation at sea level

taking into consideration the Conservation Factor setting.  It begins counting down 10

minutes after surfacing from a dive, counting down from a maximum of 23:50 to 0:00

(hours:minutes).

When the Countdown reaches 0:00 (hours:minutes), which will generally occur prior to the

FLY countdown reaching 0:00, the SAT screen remains in the sequence of accessible

screens displaying 0:00 until the FLY counter shuts the Dive Computer Mode OFF 24 hours

after a last dive.

Fig. 72 - Fly Mode