Oceanic ATOM Operating Manual - page 12

12

PC INTERFACE

Interface with a PC is accomplished by connecting the ATOM

(Watch) to a PC USB port using the USB Interface Cable pro-

vided.   The same Cable is used for Upload and Download.

There are 2 software programs on the CD together with a USB

Driver and a separate User Manual that can be printed for

personal use.  The Settings Upload program is a convenient

method for entering Time, Alarm, and Utility settings into the

ATOM.  The Data Download program is used to retrieve Data

that was sampled during dives and stored in the ATOM's

memory.

The ATOM checks for an External Access request once every

second while in the Watch Main Time.  Checks are not made if

the unit is WET.  For a connection to be made, the Interface

Cable is clipped onto the ATOM's Data Port and plugged into a

PC USB Port.  To establish the connection, the PC program must

be running asking RUTHERE.  When the connection is made, all

segments of the ATOM appear on the display (Fig. 2) until

completion of the Upload or Download operation.

•  The ATOM reverts to the Main Time screen after completion

of the Upload or Download operation, or after 2 minutes if

no PC action was taken.

Fig. 2 - PC Interface