Oceanic ATOM Operating Manual - page 58

58

SET TISSUE LOADING BAR GRAPH (TLBG) ALARM

Information includes (Fig. 55):

>  Graphic TLBG

>  TLBG Set Point (segments), flashing.

•  Pressing and releasing the S button momentarily (< 2 sec-

onds) will decrease the Set Point from All 5 segments (Deco)

to 1 in increments of 1 segment.

•  Depressing and holding the S button will scroll through the

Set Points at a rate of 4 Set Points per second until it is

released.

•  Pressing and releasing the A button momentarily (< 2 sec-

onds) will save the setting and/or advance to the SET DIVE

TIME REMAINING  (DTR) ALARM screen with the Set Point

flashing.

•  Pressing and releasing the A button momentarily and repeat-

edly (< 2 seconds each time) will step through the other SET A

screens.

•  Depressing the A and S buttons simultaneously for 2 seconds

will save the setting and revert back to the SET A screen.

•  Depressing and holding the M button for 2 seconds will revert

to the Surface Mode screen.

•  If no button is pressed during a period of 2 minutes, the unit

will revert to the Surface Mode screen.

Fig. 55 - Set TLBG Alarm

Setting the TLBG

Alarm to activate

before it enters the

DECO is highly

recommended.