Riverbed Steelhead CX Series Installation Manual - page 13
of
50
Rack Installation Guide
9
Mounting Desktop CX Systems in a Rack
Installing Steelhead CX, DX, EX, Granite, and Cascade Systems
The CX255 system must be installed in a front mount position.
Figure 1-2. Installing the Desktop CX System in a Rack
4.
Insert and tighten the rack post screws on each side of the system.
Insert the screws in the top and middle positions of each mounting bracket.
To install the CX255 system in a rack in a side-by-side configuration with RMK-016
1.
If the system is already installed in a rack using the standard mounting brackets, remove the system
from the rack and remove the mounting brackets.
2.
Attach the inner rails to each side of the appliance.
Secure each inner rail with four screws.
Figure 1-3. Attaching Inner Rails