Riverbed Steelhead CX Series Installation Manual - page 46
42
Rack Installation Guide
Installing Whitewater xx30 Systems
Installing Whitewater Expansion Shelves in a Rack
enclosure (see
Figure 3-2
) before continuing to fully withdraw the chassis.
Figure 3-2. Latch Position
For More Information
See the Whitewater Cloud Storage Appliance Installation Guide for more information and next steps.
See the Whitewater xx30 Series Hardware Owner’s Manual for more details about the hardware and technical
specifications.
Installing Whitewater Expansion Shelves in a Rack
This section describes how to install your Whitewater expansion shelf in an industry standard 19-inch rack.
Rack Installation Pre-Requisites
You can install the Whitewater expansion shelves in an industry standard 19-inch cabinet. Before you start,
make sure that the site where you will install and use your Whitewater storage system has:
A Standard AC power from an independent source or a rack power distribution unit with an UPS
(Universal Power Supply).
Minimum depth: 707 mm (27.83 inches) from rack posts to maximum extremity of enclosure (excludes
rear cabling).
Weight: up to 50 kg (110 lb), dependent upon configuration, per enclosure.
Latch