Riverbed Steelhead CX Series Installation Manual - page 37
of
50
Rack Installation Guide
33
Mounting 1U Steelhead xx50 Systems in a Rack
Installing Steelhead xx50 and Whitewater xx10 Systems
2.
To detach the outer rails, slide the outer rail to the end of the system, push the release latch towards the
front of the system, and pull the outer rail completely off the system.
Figure 2-12. Detaching the Outer Rails
3.
To remove the inner rail, unscrew the three screws on each side of the chassis.
Figure 2-13. Removing Inner Rail Securing Screws