Riverbed Steelhead CX Series Installation Manual - page 15
of
50
Rack Installation Guide
11
Mounting Desktop CX Systems in a Rack
Installing Steelhead CX, DX, EX, Granite, and Cascade Systems
5.
Insert the power supply platform that contains the middle rail. Tighten the two thumb screws in the rear
to secure it.
This platform has metal studs on the outside that slide in the channels on the outer rails.
Figure 1-6. Inserting the Power Supply Platform and Middle Rail
6.
Slide each desktop appliance into the rails and tighten the thumb screws.
The metal studs on the inner rails slide into the channels on the outer rails.
Figure 1-7. Inserting the Appliance