Riverbed Steelhead CX Series Installation Manual - page 14

10

Rack Installation Guide

Installing Steelhead CX, DX, EX, Granite, and Cascade Systems

Mounting Desktop CX Systems in a Rack

3.

Attach the mounting brackets for the side-by-side rack kit to each side of the appliance. 

Each mounting bracket attaches with two screws. Both brackets are the same, but since they attach to 

opposite sides of the appliance, they are oriented differently when installed.

Figure 1-4. Attaching Mounting Brackets   

4.

Attach the outer rails to the rack and secure each end with two screws.

Figure 1-5. Attaching the Outer Rails

If needed, adjust the rail size to fit your rack. Each rail has six screws that secure the rail components to 

establish the length. You can loosen the screws and slide the rail components to make small 

adjustments to the length or move the screws to another position to make larger adjustments.