Webasto Thermo Top C Installation Instructions Manual - page 3
Opel Vivaro
1311875A_EN
3
Heater Unit/Installation Kit
Optional heater control either:
Heater unit recommended for the respective vehicle class:
The selection of the heater unit is based on the passenger compartment size of the vehicle and the
level of comfort required by the customer!
Foreword
These installation instructions apply to Opel Vivaro Diesel vehicles - for validity, see page 2 - from
model year 2007 and later, assuming technical modifications to the vehicle do not affect installation,
any liability claims excluded. Depending on the vehicle version and equipment, modifications may be
necessary during installation with respect to these installation instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the Thermo Top C/P/E must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.
General Instructions
Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring
harnesses using cable ties.
Sharp edges should be fitted with edge protectors (split-open plastic hose).
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No.
111329).
Special Tools
- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
- Torx E5 nut
Quantity Description
Order No.:
1
Opel-specific heater unit delivery scope
See Opel price list
1
Installation Kit for Opel Vivaro from 2001 TT/C Diesel
9002568H
Quantity
Description
Order No.:
1
Heater control
See Opel price list
Vehicle
Heater unit
Compact car
Thermo Top E
Mid-size car, station wagon
Thermo Top C
Full-size car, van, offroader
Thermo Top P