Webasto Thermo Top C Installation Instructions Manual - Fiat Grande Punto
3
3
Fiat Grande Punto
Heater Unit/Installation Kit
Heater unit recommended for the respective vehicle class:
The selection of the heater unit is based on the passenger compartment size of the vehicle and the
level of comfort required by the customer!
Foreword
The installation instructions apply to the Fiat Grande Punto vehicles with a Gasoline engine
- For the validity, see page 2 - from model year 2006 and later, assuming technical modifications to the
vehicle do not affect installation, any liability claims excluded. Depending on the vehicle version and
equipment, modifications may be necessary during installation with respect to these installation
instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the Thermo Top C/P/E must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.
General Instructions
Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring
harnesses using cable ties.
Sharp edges should be fitted with edge protectors (split-open plastic hose).
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No.
111329).
Special Tools
- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
- Metric thread-setter kit
Quantity
Description
Order No.:
1
Retail accessories with desired heater control
See price list
1
Installation kit for Fiat Grande Punto Gasoline
1310662A
Vehicle
Heater unit
Compact car
Thermo Top E
Mid-size car, station wagon
Thermo Top C
Full-size car, van, offroader
Thermo Top P