Webasto Thermo Top C Installation Instructions Manual - Audi A4 1.9 + 2.0 Tdi
3
3
Audi A4 1.9 + 2.0 TDI
Heater Unit / Installation Kit
Recommended heater unit for the relevant vehicle class:
Select the heater unit based on the size of the vehicle passenger compartment and the customer's
comfort requirements.
Foreword
These installation instructions apply to vehicles Audi A4 1.9 + 2.0 TDI with Diesel engines.
– Re. validity, see page 2 – from model year 2006 and later, assuming technical modifications to the
vehicle do not affect installation, any liability claims excluded. Depending on the vehicle version and
equipment, modifications may be necessary during installation with respect to these installation
instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the Thermo Top C/P/E are to be observed in any event.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.
General Instructions
Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and cable harnesses to original vehicle lines and cable
harnesses using cable clips.
Sharp edges should be fitted with edge protectors (split open plastic hose).
Spray unfinished body areas, such as for example bore holes, with anti-corrosion wax (Tectyl 100K,
Order No. 111329)!
Special Tools
- Torque spanner for 2.0 - 10 Nm
- Vise-grip wrench
- Riveting nut tool
Amount
Description
Order no.:
1
Commercial supply of required control
See price list
1
Installation kit for Audi A4 1.9 + 2.0 TDI Diesel
9015441A
Vehicle
Heater unit
Compact car
Thermo Top E
Mid-class, station wagon
Thermo Top C
Luxury, van, off-roader
Thermo Top P