Mahr Digimar 817 CLM Operating Instructions Manual - page 108
108
Mahr GmbH • Digimar 817 CLM
7.8.3
Delete program
– Select program and confirm
7.8.4
Rename program
– Select program and confirm.
– Enter a new program name and confirm.
7.8.5
Export program (USB-memory)
Mark the appropriate program in the program directory
and confirm by pressing the ON/OFF key.
Please refer to chapter 6.13.3 Program directory
USB memory.
7.8.2
Program directory
If more than 5 files have been saved, use the arrow
keys to display the names of the other files.
In addition to the file names the following information is
also displayed: time, the date that the file was saved
and the size of the file
In the bottom of the display are the number of free
bytes, i.e. the available memory capacity.
Delete program
PRG1
09:57
04/Sep/06
755
TEST1
09:59
04/Sep/06
1175
TEST5
10:18
04/Sep/06
587
Bytes free :
63001
Program directory
PRG1
09:57
04/Sep/06
755
TEST1
09:59
04/Sep/06
1175
TEST5
10:18
04/Sep/06
587
Bytes free :
63001
– Program is sent from the program memory to the
USB memory
New file name
Old name:
Prog1
new name:
Prog3
Rename program
PRG1
09:57
04/Sep/06
755
TEST1
09:59
04/Sep/06
1175
TEST5
10:18
04/Sep/06
587
Bytes free :
63001
Program directory
PRG1
09:57
04/Sep/06
755
TEST1
09:59
04/Sep/06
1175
Bytes free:
60457
1. <-_______
2. Program directory
3. Delete program
4. Rename program
5. Export program to USB memory
6. Import program from USB memory