Mahr Digimar 817 CLM Operating Instructions Manual - page 45
Manual is about: quick height
of
152
45
Mahr GmbH • Digimar 817 CLM
Description / Sequence
Symbols / Pictures
0
⇒ Value 50.000 mm will change to 150.000 mm.
⇒ When measuring a 100.000 mm gage block, the height
measuring instrument will
show 200.000 mm in the display.
Note:
Reset the actual Preset value by pressing the zero point key and the
variable function key „Basis-zero point, base plate“