Mahr Digimar 817 CLM Operating Instructions Manual - page 48
Manual is about: quick height
of
152
48
Mahr GmbH • Digimar 817 CLM
4.2.8
Zero point errors
–
Before setting workpiece zero point 02 or 03, workpiece zero point
must be set first.
–
Index 02 means that 02 must have a higher characteristic number
than 01.
–
Index 03 means that 03 have a higher characteristic number
than 01 or 02
4.2.9
Further zero point functions
–
Please refer to Chapter „Variable functions key 4.8“
Attention!
Within a measuring program only 1 zero point may be
set!
Description / Sequence
Symbols / Pictures
0,00
ABS
AUTO
01