Mahr Digimar 817 CLM Operating Instructions Manual - page 81

81

Mahr GmbH • Digimar 817 CLM

Description / Sequence

Symbols / Pictures

SELECT.TXT

All measured values to be transferred!

–

Should further measured values to be stored, once again press

the Save key

The data will be stored as follows

ACTUPART.TXT

ALLPARTS.TXT

Only the measured values will be transferred that have not been

already saved!

SELECT.TXT

All measured values; even those that have been saved will be

transferred!

See chapter 6.13.6 USB memory administration