Mahr Digimar 817 CLM Operating Instructions Manual - page 59
Manual is about: quick height
of
152
59
Mahr GmbH • Digimar 817 CLM
4.5.2 Entering a tilting angle
(arithmetic workpiece alignment)
Mount both the probe and holder, see chapter 4.4.2
–
Press the 2D key
Select:
-
Manually enter the tilting angle
-
Calculate tilting angle
-
Active 2D
-
Tilt workpiece
–
Measure the tilting angle
The following menu appears in the determination of the
perpendicularity error
–
See chapter 4.4.2
Measuring the perpendicularity error
The following menu will appear:
–
Accept the angle
–
Stop measurement and go to the graphic mode
–
Accept the tilting angle
α
–
Abort
Accept the tilting angle
α:
Calculating the tilted angle can be used for further 2D measurements.
Description / Sequence
Symbols / Pictures
2D
a
a
z
x
2D
ON
a
a
a