Mahr Digimar 817 CLM Operating Instructions Manual - page 79
Manual is about: quick height
of
152
79
Mahr GmbH • Digimar 817 CLM
5.1
Delete measured values
5
Deleting, saving and printing measured values
Description / Sequence
Symbols / Pictures
5.1.1
Delete
Press the CE key
Select
–
Delete the last characteristic
–
Delete all characteristics
By pressing one of these keys, either the last or all characteristics will
be deleted.
Note:
Once there are more than 99 characteristics, the first characteristic will
be automatically deleted. There is no warning that the memory is full!
5.1.2
Clear an entry
–
Use the arrow keys to position the cursor upon the digit to be
deleted
–
Press the „CE key“ to delete the digit
Note:
Further functions regarding „Delete“ can be found in chapter 6.14.7,
Delete menu.
CE
CE