Mahr Digimar 817 CLM Operating Instructions Manual - page 78

78

Mahr GmbH • Digimar 817 CLM

Description / Sequence

Symbols / Pictures

4.8.7 Absolute zero point

–

Press the ABS key to set the zero point back to the base plate,

then the function key „0.00“ appears.

Reference to the base plate

All further measurements will be in reference to the base plate.

ABS

0,00

A

B

C

4.8.8 Displaying the characteristics

The function key display characteristic provides a better overview; the

actual characteristics will be displayed, provided that they are suitable

for further calculation. The third display characteristic C is only required

for angle and coordinate calculation in the 2D mode.

–

Characteristic A

–

Characteristic B

–

Characteristic C